Category: Readers Questions

[wpsm_divider top=”20px” bottom=”20px” style=”clear”]
We get questions and request for advice from our readers regularly through email and social media. The questions we are asked and their answers may potentially be valuable to others too, so we have decided to share the best ones on the blog.

Today’s question comes from Brad.

I am looking into a camera system for outdoor security. My internet access at home is a wireless jetpack only. Is there a system that can connect to the base station without an Ethernet cable or an hard cable ? I want the ability to view from my phone.

Every conventional wireless NVR system I’ve seen would connect to your router through an Ethernet cable. I assume by wireless jetpack you mean one of these devices which don’t have an Ethernet port.

If you want a DIY camera system like mine or if you want a fully-fledged NVR kit with 24/7 recording, then the easiest option is to connect the NVR via Ethernet to a [easyazon_link identifier=”B010S6SG3S” locale=”US” tag=”vueville.com-eaz-20″]wireless extender like this one[/easyazon_link] which has a physical Ethernet port. The wireless extender then connects to your jetpack’s Wi-Fi network. Neat and efficient. You can also plug an [easyazon_link identifier=”B07PFYM5MZ” locale=”US” tag=”vueville.com-eaz-20″]unmanaged 8-port switch[/easyazon_link] into the Wi-Fi extender and then plug all your wired Ethernet devices into that switch (including the NVR) 🙂

[easyazon_image align=”center” height=”500″ identifier=”B010S6SG3S” locale=”US” src=”https://m.media-amazon.com/images/I/31ofls7oFzL.jpg” tag=”vueville.com-eaz-20″ width=”247″]

If you have an old WiFI router lying around, you can put it in ‘wireless bridge’ or ‘repeater’ mode to achieve the same results as above for free (see Asus example). I have this setup in one part of my home where my main Wi-Fi doesn’t reach.

If you don’t need 24/7 recording and need only 1 camera (or less than 4), I would just get a wireless IP camera like this one from Reolink which doesn’t need an NVR – they are capable of independent operation. They can connect to your wireless jetpack through Wi-Fi and then you can see all your cameras in one app on your mobile phone or PC. There are no subscription fees at all. Motion detection clips are saved to the SD card onboard, and you get emails with photos or 30 sec video clips. So a very cheap option without a 24/7 recording feature.

Do you have a question for us? Contact us and fire away!

[wpsm_divider top=”20px” bottom=”20px” style=”clear”]
We get questions and request for advice from our readers regularly through email and social media. The questions we are asked and their answers may potentially be valuable to others too, so we have decided to share the best ones on the blog.

Today’s question comes from Paul in San Diego.

Dear VueVille,

I’m working on a security camera plan for an older neighbor who lives alone and is concerned about staying safe.

I noticed that some of the IP cams you recommend have onboard storage, and I wondered if perhaps there might be a way to just skip the NVR and just rely on onboard recording?

If something did happen, she would likely know about it quickly and I could help her export whatever footage she needed for evidence purposes.

But I’m not sure how she would be able to view this kind of setup remotely or get a comprehensive view of all of her cameras at once as you can when everything’s being stored on an NVR.

For example, if she were to buy several of [easyazon_link identifier=”B016UCNPEE” locale=”US” tag=”vueville.com-eaz-20″]Reolink RLC-410S[/easyazon_link], would the Reo-Link software allow her this kind of functionality without an NVR?

Thanks,
Paul in San Diego

[wpsm_divider top=”20px” bottom=”20px” style=”clear”]

Thanks for the question Paul! Good on you for helping out your neighbour.

Yes, she can buy cameras with on-board storage for motion detection recording. These are cameras with a feature I like to call a ‘built-in’ NVR (Network Video Recorder). They can be standalone cameras that can record motion detection video clips or snapshots to on-board storage, and lets you view them on a timeline with markers for events. Here’s what the Reolink browser interface looks like:

Just remember to get a high speed SD card like the [easyazon_link identifier=”B073JYVKNX” locale=”US” tag=”vueville.com-eaz-20″]Sandisk Ultra MicroSD[/easyazon_link]. Make sure all the cameras are from the same manufacturer.

Then she can use the Reolink mobile app or desktop software to live-view them simultaneously in one place. She can also review recorded footage from any of those cameras in the same app. The Reolink app is pretty good and we use it daily as our baby monitor with the Reolink C1 Pro.

However, there is a risk that a burglar may vandalise or steal the camera. You would then lose the footage of the incident also. You will still have the motion detection email alerts with snapshots of the incident, but there may not be a clear shot of the burglar’s face.

So we recommend going for an NVR if the budget can be stretched. The other advantage is that your neighbour can have all the cameras record 24/7 instead of only motion triggered recording.

If it is not possible to stretch to an NVR right away, go with cameras from the same manufacturer. She won’t have any compatibility issues that way.

You could mix and match camera brands as long as they all support ONVIF and RTSP. You can then use a 3rd party viewer app like tinyCam Monitor Pro or IP Cam Viewer for iOS. But then later on it’s a bit trickier to get an NVR which will work with all the cameras.

Another downside of the built-in NVR method is that the motion detection of the Reolinks (and Amcrests) is the basic variety. So there will be quite a few false alerts. False alerts are bad for obvious reasons, but the longer-term issue with false alerts is that users will eventually start ignoring alerts altogether. After all, they could be false right?

So there’s a real risk they may ignore that one genuine alert that happens once a month. The Hikvision and Dahua models have advanced motion detection. This is more difficult to set up but is far better in the long run because false alerts can then easily be minimised.

We hope this gives you the information to continue with the camera install.

If you have questions related to home security cameras or smart home gear, send it in now!